Helioset pressurized 250L, 350L
Individual pressurized solar thermal water heaters, 250 or 350 liters
- Compact solution: most components are integrated to the cylinder
- Covers the hot water needs of families of 2 to 7 people
- Simplification of planning: components are predefined
- Simplification of installation: the work of the installer is reduced to a minimum
Individual pressurized solar thermal water heaters Helioset
Helioset 250 and 350 liters pressurized is a solar water heater suitable for individual houses. It meets the hot water needs of families of around 2 to 7 people. You can add an electric or gas back-up to cover the needs in less sunny periods or when the demand for hot water is particularly high.
Pressurized Helioset is a compact solution: most of the components are directly installed on the cylinder. In this way the work of the installer for planing and installation is reduced to a minimum.
Specifications
Specifications
| Units | 1 coil version (S1) | 2 coils version (S2) | |
|---|---|---|---|
| Helioset 150 | |||
| Cylinder water capacity | L | 150 | not existing |
| Maximum temperature of water | °C | 85 | |
| Solar exchanger surface | m² | 1,3 | |
| Number of collectors recommended | 1 | ||
| Dimension of collectors (H x W x D) | mm | 2033 x 1178 x 80 | |
| Helioset 250 | |||
| Cylinder water capacity | L | 250 | 250 |
| Maximum temperature of water | °C | 85 | 85 |
| Solar exchanger surface | m² | 1,3 | 1,3 |
| Back-up exchanger surface (for boiler) | m² | 0,7 | |
| Number of collectors recommended | 1 or 2 | 1 or 2 | |
| Dimension of collectors (H x W x D) | mm | 2033 x 1178 x 80 | 2033 x 1178 x 80 |
| Helioset 350 | |||
| Cylinder water capacity | L | 350 | 350 |
| Maximum temperature of water | °C | 85 | 85 |
| Solar exchanger surface | m² | 1,6 | 1,6 |
| Back-up exchanger surface (for boiler) | 0,8 | ||
| Number of collectors recommended | 2 or 3 | 2 or 3 | |
| Dimension of collectors (H x W x D) | mm | 2033 x 1178 x 80 | 2033 x 1178 x 80 |